You Are Here: HOME>Inductive Switch>Microwave Sensor>Dimmable MW Sensor > TA-WD601

TA-WD601

Dimmable Microwave Motion Sensor

  • Dimmable function of the motion sensor
  • Detect through light cover
  • Works well at very high or very low temperature

10%-100% dimming; fit with 0-10V dimmable ballast or dimmable driver; Automatically change the brightness according to the environmental brightness
Hidden sensor: the sensor is wiedely used for the situation that it"s hard to mount sensor outside, such as many kinds of ceiling lamps and electric appliances with plastic crusts, because it can detect the slight movements through doors, panes of glass or thin walls.
Besides, another advantage is the sensor can work well under the temperature from -10°C to 55°C.
The sensor can be celing mounted and wall mounted.
The high-frequency output of this sensor is ≤ 10mw (the test value is less than 0.01mw) that is just one 100th of the transmission power of a mobile phone or the output of a microwave oven.


Technical Data:

The dimmable standby brightness can be 10-60%
TA-WD601 is according to the ambient brightness regulating potentiometer, the light source of luminance changes between 10% to 100%.
With the clockwise, the luminance increases, while
Anti-clockwise, decreases. It can set the ambient brightness.


Power source:

90-240V/AC

Power frequency:

50/60Hz

Rated load:

200W Max. (220VAC Fluorescent)

HF system:

5.8GHz CW radar, ISM band

Installation sit:

Ceiling mounting, Wall installation

Transmission power:

<0.2mW

Detection range:

1m/2m/3m/4m/5m/7m/9m/12m(radii.)

Light-control:

15-330LUX

Detection angle:

360°(Ceiling installation)
180°(wall installation)

Time setting:

10sec/20sec/30sec/50sec/90sec /150sec/210sec/300sec

Half bright state(standby time):

0.5min/1min/3min/5min/10min/20min/40min/60min

Standby power:

Approx. 0.5W

Size:

41*27.5*86mm