Master/slave signal transfer: When one light is triggered and switch on, it emits the signal to other lights in the same group, and triggers them on, too.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status, and waiting for the next room.
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
Technical Data:
Item No.
|
TA-WA710
|
Input voltage
|
180-240V/AC
|
Rated Loading
|
LED 16W
|
Power frequency
|
50/60Hz
|
Installation sit
|
Indoors, ceiling mounting
|
Transmission power
|
<0.2mW
|
Working temperature
|
-15° C~+70° C
|
Power consumption
|
Approx. 0.5W.
|
IP Rating
|
IP20
|
HF system
|
5.8GHz CW radar, ISM band
|
Adjustment Type
|
Dip
|
Light Control
|
10LUX.30LUX.50LUX.DAY
|
Detection
angle
|
360°
|
Detect Distance (radii.)
|
2-10m
|
Time delay
|
10sec to 10min
|
Detection angle
|
360°
|
Doppler HF sensor TA-WA710 is a moving object sensor that can detect range of 360° And it's working frequency is 5.8G.
The advantage of this product is stable working state (stable working temperature: -15° C~+70° C), TA-WA710 adopts a microwave sensor(high-frequency output<0.2mW), so that it is safe and performs better than infrared sensor.
It can be installed inside of product that is made of glass and plastic because that these materials make little effect to microwave. Connect the product as shows below; You can change a common light to an automatic light.