Master/slave signal transfer: When one light is triggered and switch on, it emits the signal to other lights in the same group, and triggers them on, too.
Stand-by dim: After a pre-set time the lighting ahead switches to dim, and comes into stand-by status, and waiting for the next room.
Indentify the ambient brightness: auto start dimming mode at night without motion signal, auto exit when ambient light is over the selected lux, or switches the light off after the setted dimming holding time.
64 groups can be set
RF transmission distance: up to 30m in open area.
Technical Data:
Item No.
|
TA-WW600
|
Input voltage
|
220-240V/AC, 110-130V/AC
|
Rated Loading
|
LED 16W
|
IP Rating
|
IP20
|
Adjustment Type
|
Dip and Knob
|
Light Control
|
10-2000lux
|
Detection
angle
|
360°
|
Detect Distance (radii.)
|
2-10m
|
Time delay
|
8sec to 10min
|
Stand-by Dim Setting Time
|
30sec, 1min, 5min, 10min, 30min, 1h, 2h, 24h
|
Stand-by Dim Setting Brightness
|
0%, 5%, 10%, 20%, 30%, 40%, 50%, 60%
|
Radio Linking Range
|
30m Radio
|
Detection angle
|
360°
|
Dimmable:
The dimmable lights are added a light down function between the light is 100% switched on and switch off.
It reduces the brightness of light when nobody there at a pre-set time. (The user can set up the brightness by themselves according to the actual usage).
If there is no motion in the stand-by time, the sensor turns off the light to save the energy. When somebody comes, the sensor will quickly turn on the light into full-brightness status. With this function the light can be extended the lifetime.