You Are Here: HOME>Inductive Switch>Microwave Sensor>Standard Microwave Sensor > TA-MW54S

TA-MW54S

Automatic Microwave Sensor

  • Detection angle:360°
  • Power consumption:Approx. 0.9W
  • Time Delay:10sec to 30min
  • Power frequency:50/60Hz
  • HF system:5.8GHz CW radar, ISM band

The microwave sensors is according to the microwave doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area.
The Detection way has the below advantages compared with other as follows:
1. Non-contact Detection,
2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light,
3. RF interference ability,
4. Transmission power only 0.2 mW, It will not harm the human Body.
Simple installation+ easy wiring. We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: - 15 ~ + 70 Celsius degrees.


Technical Data:

Item No.

TA-MW54S

Input Voltage

220-240 V/AC, 110-130 V/AC,12-30 V/DC

Rated Loading 

1200W (220-240 V/AC)     600W(110-130 V/AC)

Detection angle

360° 

Power consumption

Approx. 0.9W

 Time Delay

10sec to 30min

Power frequency

50/60Hz

HF system

5.8GHz CW radar, ISM band

Transmission power

<10mW

 Detect Distance (radii.)

 2-12m(adjustable)

 Light Control

 2-2000Lux

 Adjustment Type

 knob

 IP Rating

 IP20


NOTE: The high-frequency output of this sensor is <0.2mW- that is just one 100 of the transmission power of a mobile phone or the output of a microwave oven.